|
|
Our Products > Test-Um Tools
 |
|
|
 |
| |
Click to enlarge
|
Tri-Porter
Product Code: IVT-600
Price: POA
The Tri-Porter Replaces up to 6 traditional Testing Tools!
Services Voice, Data, and Video
The first network installation tester that provides a full range of physical wiring tests for the fast, efficient delivery of IP-based voice, data and video services in the home or small office with one integrated tool.
Voice Telephony Testing
Testing and verifying proper operation of each telephone outlet assures adequate signal levels for all offered services. Power-up telephone systems with the on-board dial tone simulator (SLIC) to test connected runs.
Advanced-function telephone butt set
Call analysis and discovery
Voltage and current readings
Line number discovery with captured digits
DTMF decode to watch dialed call numbers for accuracy
Call Waiting service testing
SLIC simulator to test lines without outside provider service
Speakerphone for hands-free listening to dial tone and line monitoring
DSL safe
20-pc remote wiremapping set
Data Testing Ethernet Networks
Test newly-installed network cables on unpowered systems or check active working networks to detect any physical layer or configuration problems.
Configure the network, test the cables and guarantee the quality
Tests to TIA568 interconnect specifications and connected length; CAT5, 5E and 6
Port discovery—ISDN, POTS, Token Ring, Ethernet, etc.
Negotiates at 100 Mbit with DHCP or manual addressing
Ping for IP address information and configuration
Identify equipment on the other end of the line, showing its speed and type
Link speed displayed, 10/100Mbit
Hub blink to find connected ends in wiring closets
Qualify lines for VoIP service at 100Mbit speeds
Cisco Discovery Protocol ready
20-pc remote wiremapping set
Video RF Detection and Testing
HDTV, video-on-demand, cable modems, etc., all demand superb signal quality to work correctly. Testing for physical and electronic variations will guarantee that everything works as it should.
Detects and measures RF service energy levels DB/Mv
Tests for opens and shorts
Displays length of each tested run
20-pc remote wiremapping set
The unique tone signal— which travels through splitter, filters and traps to trace lines while the system is powered-up and in-use—is detectable by the Tri-Porter tracer unit |
|
 |
|
|
 |
|
|
|
|
| |
Click to enlarge
|
Low Cost Test Set or Buttinski
Product Code: LB-300
Price:
Resi-Talker™ Test Set
Test-Um's most economical test set for basic telephone system work
Tone and Pulse Dialing
Microphone Mute
Last Number Redial - 32 digits
Continuous Line Polarity Indication (TALK or MONITOR)
Electronic Ringer
Amplified Line Monitor for volume levels comparable to "off hook" operation
RJ12 Modular Cord Set Attachment
Includes test lead, RJ12 to Alligator Clips
Low Battery Indicator
Battery Powered Monitor Mode with auto power off on dead lines or when disconnected
Note; This Butt has approx 270K Ohm loop resistance when in "Bell" or "Monitor" Modes. This is so that the Line polarity circuity functions correctly. |
|
|
|
|
|
|
|
|
|
| |
Click to enlarge
|
Lil' Buttie Test Set or Buttinski
Product Code: LB100
Price: POA
Lil' Buttie™
Lil' Buttie: Hands free test set with headset. At half the size and half the weight, the Lil' Buttie sets a new standard in field test sets.
Includes Handsfree Headset
Tone and Pulse Dialing
Microphone Mute
Last Number Redial --- 32 Digits
Continuous Line Polarity Indication (TALK or MONITOR)
Electronic Ringer
Amplified Line Monitor for volume levels comparable to "off hook""operation
RJ12 Modular Cord Set Attachment
Includes test lead, RJ12 to Alligator Clips
Low Battery Indicator
Headset Jack
Battery Powered Monitor Mode with auto power off on dead lines or when disconnected
Note; This Butt has approx 270K Ohm loop resistance when in "Bell" or "Monitor" Modes. This is so that the Line polarity circuity functions correctly. |
|
|
|
|
|
|
|
|
|
| |
Click to enlarge
|
Lil' Buttie PRO Test Set or Buttinski
Product Code: LB220
Price: POA
Lil' Buttie Pro™
Telephone test set with LCD readout and voltmeter
Five Number Memory
Technical Support Number programmed into memory dial
Tone and Pulse Dialing
Microphone Mute
Last Number Redial --- 19 Digits
Electronic Ringer
Amplified Line Monitor for volume levels comparable to "off hook" operation
Modular Cord Set Attachment
Headset for hands-free use
Auto Power Off eliminated dead batteries
LCD Display shows ---
- On-hook voltage
- Number dialed
- Off-hook current
- Set-up information
- Stored numbers
- Battery condition
- Continuous polarity indication
- Caller ID
- Call waiting / Caller ID
- Caller ID errors
- Tone and Pulse Dialing
Note; This Butt has approx 270K Ohm loop resistance when in "Bell" or "Monitor" Modes. This is so that the Line polarity circuity functions correctly. |
|
|
|
|
|
|
|
|
|
| |
Click to enlarge
|
High Sensitivity Tone Tracer
Product Code: TT-100
Price: POA
High-Sensitivity Tone Tracer
The Tone Tracer sets a new standard for field service professionals. Due to its slim, ergonomic design, as well as balanced weighting, the TT100 is the most comfortable tracer available. It can be used with either a wearable headset of a standard cell phone headset. Quick-change tips make for easier in-field use. Includes low battery indicator |
|
|
|
|
|
|
|
|
|
| |
Click to enlarge
|
LAN ROVER Tester/Analyzer
Product Code: TP-500
Price: POA
LanRover™
Offers a new price/performance level for verification of wiring faults and configurations on all your data cable
Cable test results displayed on main unit and remote unit, in less than 2 seconds after plugging in the cable
Auto-on and auto-off when testing cables, just plug both ends into tester!
Snap-together case for easy storage and convenient patch cable testing
Tone generator mode for use with tone tracers, auto-off
Debug mode with from/to and failures for each pair
Test for short, opens, miswires, reversals and split pairs
Battery low indicator |
|
|
|
|
|
|
|
|
|
| |
Click to enlarge
|
LAN ROVER PRO Tester/Analyzer
Product Code: TP-600
Price: POA
LanRoverPRO™
This high-performance length measurement CAT 5/6 tester identifies multiple faults clearly without interpretation for fast results; clear wiremapping form displayed on 2-line, 16-character LCD display; and measures cable length
Measures cable length as a stand-alone function
Test for short, opens, miswires, reversals and split pairs
Identifies multiple faults clearly without interpretation
Clear wiremapping form displayed in 2-line, 16-character LCD display
Auto-off/Auto-on. Up to 10 times better battery life than other testers
One-ended testing with Pre-test mode for fast results
Built-in tone generator with selectable tones and pair capability |
|
|
|
|
|
|
|
|
|
| |
Click to enlarge
|
LanRoverPRO Kit with 8 remote identifiers
Product Code: TP-607
Price: POA
LanRoverPRO™
Kit with 8 remote identifiers Number 1 - 8
This high-performance length measurement CAT 5/6 tester identifies multiple faults clearly without interpretation for fast results; clear wiremapping form displayed on 2-line, 16-character LCD display; and measures cable length
Saves Time Identifing Outlets ( Remotes No 1 - 8 displayed on LCD )
Measures cable length as a stand-alone function
Test for short, opens, miswires, reversals and split pairs
Identifies multiple faults clearly without interpretation
Clear wiremapping form displayed in 2-line, 16-character LCD display
Auto-off/Auto-on. Up to 10 times better battery life than other testers
One-ended testing with Pre-test mode for fast results
Built-in tone generator with selectable tones and pair capability |
|
|
|
|
|
|
|
|
|
| |
Click to enlarge
|
RJ12 Breakout Box or 'Modtest'
Product Code: LB66
Price: POA
Gain circuit access without disconnecting equipment. Angled sturdy copper contacts prevent clips from disconnecting during testing.
Has an RJ12 6P6C on each end with 6 positions for Alligator clips to be attached in body on unit.
Comes with short RJ12 to RJ12 lead. |
|
|
|
|
|
|
|
|
|
| |
Click to enlarge
|
RJ45 Breakout Box or 'Modtest'
Product Code: LB68
Price: POA
Gain circuit access without disconnecting equipment. Angled sturdy copper contacts prevent clips from disconnecting during testing.
Has an RJ45 8P8C on each end with 6 positions for Alligator clips to be attached in body on unit.
Comes with short RJ45 to RJ45 lead. |
|
|
|
|
|
|
|
|
|
| |
Click to enlarge
|
"Testifier" All Cable Tester
Product Code: TP-350
Price: POA
The new Testifier™ produces the most accurate and easy-to-understand results of any cable tester/verifier on the market.
Its large LCD display is easy to read--it shows a clear picture of a wired cable; data, coax, telephone, security/alarm, or unterminated site wire.
Condition: Testifier shows Opens, Shorts, Miswires, Split Pairs, PASS and FAIL results fast - on a clear, full alpha/numeric LCD display.
Location: Testifier is supported by the most comprehensive set of optional wiremapping locators in the world.
Up to 20 cable end locations at a time can be identified and tagged.
Position: Testifier's built-in tone generator is the most flexible and function-packed tone generator you will ever use.
Its configurable signal can be generated to find and fix the position on any type of cable - either exposed or hidden, in ceilings or behind walls |
|
|
|
|
|
|
|
|
|
| |
Click to enlarge
|
Tone Generator with Dial Tone Simulation
Product Code: TG400
Price: POA
"Powers-up" the installed telephone lines under actual load conditions with a simulated dial tone to check connectivity and proper wiring configurations without a service connection.
Full-feature tone generator with 3 different tone sounds and continuity test
Generates a unique tone sequence for testing speaker installations by "popping" speakers---will work with either AC or DC coupled speaker types
Requires 9V battery (not included)
Suitable Tone Detector/Probe is TT100 |
|
|
|
|
|
|
|
|
|
| |
Click to enlarge
|
"F" Set with Turbo Tone Generator
Product Code: KP105
Price: POA
TG200 and TT100 in a Nylon Pouch
A tough Cordura™ kit pouch houses the Tone Tracer (TT100) and the 'Turbo' Tone Generator (TG200) for convenience in the field. A closure flap protects the instruments and has both a belt loop on the back as well as a metal clip ring for multiple mounting options. The kit includes one cord set with alligator clips.
TT100: Tone Tracer
The Tone Tracer sets a new standard for field service professionals. Due to its slim, ergonomic design, as well as balanced weighting, the TT100 is the most comfortable tracer available. It can be used with either a wearable headset of a standard cell phone set. Quick-change tips make for easier in-field use.
TG200: Turbo-Tone
Turbo-Tone™ generates as much as 700% more power than standard tone generators! Advanced features give you more control and options for all field applications - it's pocket-sized, but packed with giant benefits. |
|
|
|
|
|
|
|
|
|
| |
Click to enlarge
|
Validator NT
Product Code: NT-955
Price: POA
Cat 5e & Cat 6 Network & Cable Certifier
To see Demonstation Click on This text.
The new Validator-NT Ethernet System All-in-One Network Management Tool puts the power of network test and configuration in your hand at an affordable price. Validator-NT’s patented method of uploading and downloading information about cable tests and network configuration will help you gather the necessary information to manage your network easily, while documenting changes, upgrades or new configurations. Validator-NT measures and presents fast and clear SPEED and PERFORMANCE CERTIFICATION results up to 1 gigabit. Speed certification assures the cabling will do the job it is rated to do. Network components such as switches, hubs, routers and systems will then operate at maximum efficiency. Wire maps up to 8 locations with the network remote identifiers.
The included powerful Plan-Um software ties together all the different cable criteria that are found in complex voice/data/video installations and presents concise information in printed reports, while storing data for future use. Simply layout your customer’s requirements in a matter of minutes, then define cable types and runs. Test/certify each cable run. Print the results and attach them to your invoice. Completing and billing a cable installation job has never been easier.
- Supports IEEE 802.3 data speed carrying specifications to 1 gigabit Measures cable length and distances to opens and shorts using advanced TDR technology. Tests telephone, coax, security/alarm, cables for continuity, proper termination and polarity. Tests shielded or unshielded Cat3, 5, 5E, 6. Wiremaps individual runs to locate and identify cable routes.
- Tests interconnect specifications per TIA 568/570, including opens, shorts, miswires, split pairs, etc.
- Active network capabilities for test, link and identification
Port Services
Ping Testing
Hub Flash
- Cable Quality Tests
SKEW NEXT All combinations on all pairs (12) Channel Response Echo Testing
(Return Loss) impedance mismatches Signal to Noise Ratio Attenuation Amplitude
Return Loss.
Bit Error Rate (BERT)
- Measures signal quality in actual link environments that could account for cable inadequacies, such as physical installation problems, kinks, loops, physical terminations, dry shorts, or miswires. Store data on either a laptop/PC or in flash card memory up to 2 GB. Use archived info when upgrading or changing previously installed systems.
NT955 Package Contents
- Validator NT Main Unit and Smart Remote, 2 lithium ion rechargeable long-life batteries, 2 AC adapter/charger units, Test Connectors 8-position shielded modular jack (data), 6-position modular jack (telephone), F-coax (video), and dual banana jack (security, speaker, etc.) USB cable assembly, Compact flash card, Plan-Um™ design layout software, Cable Certification Labels (roll of 100), Set of 8 network remote identifiers, and 2 Sacrificial Cable modules (RJ 45).
- Deluxe carrying case with cushioned sides |
|
|
|
|
|
|
|
|
|
| |
Click to enlarge
|
LanScaper Network Tester
Product Code: NT700
Price: POA
LanScaper Network Tester
Perform physical layer network management with the functions of a high-end cable tester and length measurement device plus the capability to monitor and correct network problems associated with the physical layer and link conditions of the network.
Key Features
- Identifies port services like Ethernet, ISDN, POTS and Token-Ring while reporting network speed, capability and location of switches and other network devices.
- Pinging function verifies connectivity to network devices and queries PC/NICs.
- Detects legacy "Phantom Power", reports current and voltage capability of analog telephone lines, identifies (maps) remotes while cable testing.
- Conducts link tests to ID speed.
- Verifies functional speed capability of terminated unconnected cable runs by sampling data packets between two LanScaper units, which exercises the run and reports the result.
- Automatically accesses DHCP host and obtains network information.
- Tests cabling configuration and verifies connectivity and length of run while conducting tests for opens, shorts, miswires, split pairs, and reversals.
- Identifies HUBs, NIC, or auto MDI/MDI-X devices.
- Blinks HUBs to ascertain connected configuration.
- Displays advertised network speed/duplex
Call About Kit Complete with 8 Remotes in Carry Bag NT-750 |
|
|
|
|
|
|
|
